TEI by Example. Module 6: Primary Sources Edward Vanhoutte Ron Van den Branden Edward Vanhoutte Ron Van den Branden Melissa Terras Association for Literary and Linguistic Computing (ALLC) Centre for Digital Humanities (CDH), University College London, UK Centre for Computing in the Humanities (CCH), King's College London, UK Centre for Scholarly Editing and Document Studies (CTB) , Royal Academy of Dutch Language and Literature, Belgium
Centre for Scholarly Editing and Document Studies (CTB) Royal Academy of Dutch Language and Literature Koningstraat 18 9000 Gent Belgium
ctb@kantl.be
Edward Vanhoutte Melissa Terras Ron Van den Branden
Centre for Scholarly Editing and Document Studies (CTB) , Royal Academy of Dutch Language and Literature, Belgium Centre for Scholarly Editing and Document Studies (CTB) , Royal Academy of Dutch Language and Literature, Belgium Gent
Centre for Scholarly Editing and Document Studies (CTB) Royal Academy of Dutch Language and Literature Koningstraat 18 9000 Gent Belgium

Licensed under a Creative Commons Attribution ShareAlike 3.0 License

9 July 2010
TEI By Example. Edward Vanhoutte editor Ron Van den Branden editor Melissa Terras editor

Digitally born

TEI By Example offers a series of freely available online tutorials walking individuals through the different stages in marking up a document in TEI (Text Encoding Initiative). Besides a general introduction to text encoding, step-by-step tutorial modules provide example-based introductions to eight different aspects of electronic text markup for the humanities. Each tutorial module is accompanied with a dedicated examples section, illustrating actual TEI encoding practise with real-life examples. The theory of the tutorial modules can be tested in interactive tests and exercises.

en-GB release corrected typos editing authoring
Module 6: Primary sources
Introduction

Texts exist in many genres and forms, each with their particular structural and semantic features. Besides structural characteristics, texts can be roughly distinguished for their 'editorial status'. Typically, the majority of conserved documents have a 'public' status: after scrupulous authoring and editing by an author and/or editorial instance, they have been published and multiplied, either as manuscript, in print or nowadays in electronic form. Still, the textual universe is wider than these published documents. Lots of texts were never intended to be published, because they have a private nature (letters, ego documents), were not considered final documents (but may have survived their published successors), were conceived as exclusive pieces of art,... Often, such texts are of great value, either because no other representations exist (anymore), because they reflect stages in the conception of a published literary work, because they are evidence of historical language use, or for many other reasons to many other types of research.

Because non-published texts typically are less editorially polished, they can contain many traces of the authoring or editing phase. Frequent phenomena in primary source materials are additions, deletions, restorations, errors, corrections,... Moreover, the condition of the material that carries the text may influence the transcription: damage may render a fragment illegible or incomplete. The TEI Guidelines offer specific elements to cover such phenomena in transcriptions. Note, however, that these phenomena are not confined to handwritten texts: analogous phenomena may occur in typewritten documents, born-digital texts that have been printed for revision, or digital texts that include some form of electronic revision control information. Although many of the TEI elements discussed in this tutorial module are available in all TEI texts, some specific ones require inclusion of the dedicated transcr TEI module in your TEI schema, documented in TEI Guidelines, 11. Representation of Primary Sources.

For directions on composing a TEI schema by selecting TEI modules and elements, see TBE Module 8: Customising TEI, ODD, Roma.

This module focuses on transcription of phenomena in primary sources rather than manuscripts, because the latter term is often understood with a specific connotation: texts written by hand before the print age. Those have their own highly specialised textual phenomena and cataloguing needs, to which a specific chapter of the TEI Guidelines is devoted (chapter 10: Manuscript Description). Instead, this module will focus on the transcription of a handwritten prose text.

Primary source material

The text we use as an example throughout this module is a fragment of There and Back Again, a story by the promising young talent Hannah Renton, in response to a writing assignment at school.

A first look at the document facsimiles above reveals that it is a prose document, with as most prominent structural features: a date, title, a graphic, and paragraphs. It could be transcribed as follows (for more details of prose transcription, see Module 3: Prose):

26/8/08 There and Back Again

I can't believe it. Carl has not written to me or sent me a postcard once since he's been away in Egypt. It would be easier if our phone was working. It's been broken for ages! Dad can't fix it at the moment, and we can't afford to buy a new one. I would write to him, but he didn't tell me the address of the villa he was staying in. If only I had a mobile, I could phone his mobile number. Eureka!!! I could use next door's phone, oh, actually, Mr and Mrs Crooel won't let me use it (they're my next door neighbours). I know. I'll use the phone box!!! (I think I've got some change).

Goodness me, this phone box stinks. EEAW, I don't even want to know what that is. Anyway, I hope his phone is switched on. What's it again??? Oh, yeah, 1312632. Arrgh!! What's happening!!! Who's shaking the phone box!! Who turned out the lights!!!

WOW!!! Where am I? Why is everything so smokey? Everything is silver except the air around me, it's black, and I'm standing in a silver pod, with something that looks like a phone. When you look up there are millions of metal poles, and some of them have what look like funny shaped cars whizzing along attached to the metal poles at the top.

the phone box travelling through time

There seems to be no-one around the phone box. Yuk! Someone has just walked past. All their skin is black and crusty and in the side of their neck are gitt like things. The whites of his or her eyes are grey and he, or she has no hair. I also notice that he, or she has a clear gas mask. It's from all the smoke.

Goodness me! I just stepped outside the phone box and I couldn't breathe. It was like a king cobra was wrapped around my neck and if I was to get a little bit of air in it was horrible, like when you stop at red man beside the traffic lights and a bus is stopped beside you and you're getting breaths of carbon dioxide. But this was 100x worse. Now I know what all the black air is: all the pollution. But that doesn't help me figure out where I am.

What's that? It's a big poster, saying: Monday 26th May 1312632. I've gone into the future!!! Wait, I recognise the date. It's Carl's number! When I typed it in on the key pad in the phone box, that must have taken me into the future: I must get back and warn everyone! I'll type in 2008. Nothing was happening. Then, Hello, dearie, an old woman answered. Who is it? I hung up. Uh, oh. How do I get back then?

I've been thinking for ages about what to do. There only seems to be one good option, fix and stop all the pollution. This sort of seems like a dream, but a fun dream. I'll just have to find out where the city's power source is.

I got round the corner and there was a BIG sign saying CITY'S POWER SOURCE. It's very oily and extremely big. Ah, this will be the switch.

Everything has gone dark and I can't see where I'm going. I keep on banging into long bars and wires and knobs. Yess!! The door!!!

There is uproar outside. I sealed the door with stones on the ground so no one could get in to turn the switch back on.

I've been thinking. If I'm going to suck out all the pollution I'm going to need help. Which is not going to be easy.

Everyone keeps on staring at me. It's very annoying. I hope people will help!

OK. I think this will work. I've put up posters everywhere. They say... MEETING BESIDE PHONE BOX BE THERE AT 2pm. I hope they read English. And English time.

...or could it? When you compare the facsimiles and above transcription, you'll notice that a lot of phenomena of this particular hand written text have been filtered out or abstracted in the transcription. Mind you, it could be a plausible transcription that strives for a representation of the contents, rather than a faithful record of its actual realisation, provided these editorial choices are stated explicitly in the header's editorialDecl element.

Take a close look at the document facsimiles above, compare it to the transcription above, and make a list of things you observe that are specific to the non-published character of this document.

Additions Deletions Different hands Colour of ink Notes Errors Corrections Damage Unclear text Lacking text
Representing primary source phenomena
Additions and deletions

In primary sources, prominent traces of the editing process are additions and deletions. Additions may be marked by differing positioning, shifts in hands, ink or font, and can be explicitly indicated by all kinds of markers. Deletions are often visible as struck out text. Because they may shed light on the writing process of the text or hold alternative readings and interpretations, additions and deletions can be very valuable elements in an electronic transcription.

Simple additions and deletions

Our sample text contains a clear addition at the top of the second page. The phrase the phone box has probably been added afterwards, as it didn't fit in the space available. This can be transcribed as an addition with the add element (from addition).

There seems to be no-one around the phone box.

Similarly, deletions can be marked with a specific element: del (from deletion). If we look closely at the same sentence, we see how the author has corrected a writing mistake by striking through a letter. This can be transcribed as follows:

There seemes to be no-one around the phone box.

Note how additions, just like deletions, can be transcribed at character level, so that they enclose exactly those letters or phrases that have been deleted or added. We can be more precise about how additions and deletions are realised. Actual rendition information can be specified in the global rend attribute. For example, we could use the rend attribute to state that the deleted text has been crossed out, and the addition has occurred above the line, possibly using some kind of formalised expression. For deletions, information like strikethrough or overwritten may be sufficient. Additionally, the add element has a specific attribute to record the place where the text had been added: place. It can combine keywords like below or above for text added below or above the line; bottom, margin, or top for text added at the bottom, margin, or top of the page, opposite or overleaf for additions on the opposite page or at the other side of the page. Our example could be extended as follows:

There seemes to be no-one around the phone box.

Often, additions and deletions can be traced by shifts in ink or writing material. As this information can convey useful insights in the writing process, it can be useful to include it in the transcription. Of course, the rend attribute could be used for this purpose, but add and del have a more sophisticated mechanism to record aspects of the hand in which they are written: the hand attribute. This attribute in itself doesn't indicate any specific features directly, but rather holds a reference to a hand description elsewhere in the document. A hand can be defined in a handNote element in the profileDesc part of the TEI header, which groups different hand definitions inside a handNotes element. A handNote definition can contain a loose prose description of the hand inside paragraphs, as well as more formalised identifications of different aspects of the hand in specific attributes: scribe (an identifier for the scribe), script (the writing style or font of a hand), medium (the type of ink), and scope (the dominance of this hand in the document). In order to make references to such a hand definition, an unique xml:id value must be provided. Inside transcriptional elements such as add and del, reference to a hand definition can be made with the hand attribute. As with all references in TEI, this takes the form of an URI pointer, of which the local part is preceded with a # sign. For this example, more details about the hand could be given as follows:

the document's main hand, Hanna Renton

There seemes to be no-one around the phone box.

Note how the hand attribute is the means to distinguish between additions or deletions in a text made by different persons, if they can be distinguished. Our sample text contains other interventions in a different ink, made by a different hand. For example, on page two, text has been added both in the margin and inline, near the original word breath. A detailed study of the genesis of this work could identify the person responsible for these additions as the author's teacher. With proper identification of this hand in the header, this attribution can be recorded in the transcription:

the document's main hand, Hanna Renton

the document author's teacher

Goodness me! I just stepped outside the phone box and I couldn't breathe. "breath" = noun "to breathe" = verb

Note how, although the content of both add elements was most probably added in the same addition, they are split in order to capture the different positioning on the page. Another thing of notice, is the slight abstraction that has been made of the actual occurrence of the marginal addition on the page: instead of interrupting the words couldn't breath, the encoder has opted to transcribe the annotation at the end ot the sentence. The inline addition, on the other hand, is transcribed where it appears in the original, and therefore not specified with a place attribute.

Additions and deletions may come in isolation like in the examples above, but often occur in combination, when existing text is deleted and new text is added. Such a case of juxtaposed deletion and addition can be found on the second page of the example, in the word that should read dioxide. Apparently, a first version was started correctly, with diox, which the author has revised to diacxside, by overwriting the original ox and adding the acx, resulting in the final reading diacxside. This can be represented with a simple sequence of del and add:

diox acxside

Such combinations of deletions and deletions can be grouped in a dedicated subst (substitution) element, in order to identify them as a single editorial intervention.

di ox acx side

Note, how the identification of the responsible hand in the hand attribute has been moved upward to the subst element. Because subst contains the individual deletion and addition by the same hand, the hand identification is inherited by the corresponding del and add elements in the transcription.

It must be acknowledged, that this analysis of the word dioxide in the text involves a fair amount of interpretation. Responsibility for these kinds of interpretation can be taken by means of a dedicated resp (responsibility) attribute. It can occur on add, del, and subst elements and points to an identified person in the TEI header of an electronic document. In this case, the TBE crew, who edited this electronic text, can be held responsible for this interpretation as follows:

There and Back Again: digital edition Hanna Renton The TBE crew

di ox acx side

Similarly, the addition and correction in the first sentence on the first page can be encoded and attributed to the teacher by means of the hand attribute:

Well done! 8,5 / 10I can't bel ei ie ve it.

Additions and deletions can be encoded respectively with the add and del elements. While the rend attribute can be used to record general visual aspects, the add element has a specific place attribute, for indicating where the addition is located (eg: inline, above or below the line,at the bottom or top of the page, in the margin, overleaf, on the opposite page). Specific characteristics of the hand can be encoded by referring to a hand definition, using the hand attribute, while responsibility for the encoding of additions and deletions can be stated in the resp attribute, referring to an identified person in the TEI header. Sequences of deletions and additions originating from one single intervention can be wrapped in a subst element.

Complex additions and deletions

Deletions and additions are not limited to a single layer of a document, as in the previous examples. They may as well nest, when for example an added fragment itself contains further deletions and/or additions. Take, for example, the fragment on page 2 of the example text, that originally read: It's a big poster, saying: .... The author later has added the phrase at the wall in the margin, but later corrected this to on the wall. This can be encoded as a single addition (at the wall), containing a nesting substitution consisting of a deletion (at) and an addition (on):

What's that? It's a big poster at on the wall, saying

Besides substitutions, often in hand written texts, an original reading is restored after being rejected first. The TEI Guidelines provide a specific element for marking such restorations: restore. This element can be wrapped around prior deletions. Take, for example, the phrase that should read Who turned out the lights!!! on the first page in the example. This has first been substituted for Who turned off the lights!!! but has afterwards been restored to the original reading, indicated both by an OK marker and the addition of the original word out:

Who turned out off the lights!!!

Apart from having internal structure themselves, additions and deletions may overlap with other logical structures of a text, for example when crossing a paragraph boundary, or a phrase that is transcribed as a name or title. Take a look, for example, at page 3 of the sample document, which features two entire sentences being crossed out. This deletion, however, runs over two paragraphs. This could impossibly be encoded with a simple deletion:

<p> <!--...--> <del>But I've got to go outside (again). </p> <p> It was a lot easier to find than I thought it would be.</del> <!--...--> </p>

That is, the markup itself (a paragraph boundary) is involved in the deletion, and can not just be enclosed in another container, which would produce overlapping hierarchies as in the previous incorrect example. Other cases that would result in invalid TEI occur when long deletions or additions that nest properly inside bigger structures encompass text structures that are illegal inside add or del (such as entire paragraphs or divisions). In order to facilitate the encoding of such cases (that are to be expected, given the tension between the unedited nature of primary sources and the formalism of the TEI markup language), the TEI guidelines provide two specific elements: delSpan/ and addSpan/. These are empty elements marking the beginning of a longer deletion or addition, respectively. The scope of the addition or deletion is made explicit by means of a specific spanTo attribute, which points to an identified end point, following in the transcription. This end point can be represented with an empty anchor/ element, an all-purpose empty element for marking a certain point in a text with an identification code with an xml:id attribute. Although they can't contain any text, addSpan/ and delSpan/ can have all attributes of their add and del counterparts. The deletion in the example document can thus be encoded as follows:

where the city's power source is. But I've got to go outside (again).

It was a lot easier to find than I thought it would be. I got round the corner and

Complex deletions and additions may be represented using nesting del and add elements. Deleted text that has been restored again can be encoded with a restore element. When deletions or additions contain logical structures that cannot be transcribed as legal content of the del or add elements, or cross structural boundaries that would lead to overlapping hierarchies, these can be represented with empty elements. The delSpan/ and addSpan/ elements can indicate the start of such deletions or additions respectively, and point to their endpoint with a spanTo attribute. The value of this attribute must point towards a following anchor/ element, an empty element identifying a point in the document with its xml:id attribute.

Facsimiles

The first page of our example text is followed by an non-numbered page containing a drawing. As seen in module 3 of this tutorial series, this can be represented with an empty graphic/ element, whose url attribute points to a digital representation of the image, and possibly be enclosed in a larger figure element providing a description of the image:

the phone box travelling through time

Alternatively, it could be interesting for primary source materials to provide access to digital facsimiles of the entire document, in order to complement the transcription with visual evidence. The TEI guidelines provide a mechanism to link each element in a digital transcription with a (part of) a facsimile: the global facs attribute (for facsimile). This attribute can be attached to any TEI element (if the transcr module is included in the TEI schema), and point to a digital scan by means of an URI. Typically, scans are made page by page (or folio by folio), which makes it most convenient to attach a facs attribute to the corresponding pb/ (page break) elements in the electronic transcription. If we have digital facsimiles for each page of our example text available under the folder scans, whose filenames consist of the letters TBA + 3 digits, these facsimiles could be linked to from the transcription as follows:

Note how this link makes the encoding of the figure inside graphic/ redundant, so that it can be left out of the transcription. Besides this simple mechanism of pointing to entire images, the TEI provides a more refined system to define specific zones inside facsimiles, that can be associated with specific elements in the transcription. As this is a more advanced topic, you are referred to the detailed discussion in TEI Guidelines, 11.1 Digital Facsimiles.

Digital facsimiles can be linked to from any element with the global facs attribute. It can hold a URI pointer to a digital scan of a document fragment.

Damage

Transcription of primary source texts may be influenced by the state of the source material. Depending on the quality of the source materials and handwriting, some passages may be unclear, which may hamper straightforward transcription. Transcription of such passages may involve higher degrees of interpretation, or even editorial intervention which may be signalled with appropriate elements that will be discussed further in this module (see ). However, if such interpretative elements are caused by material damage to the source text, this damage can be included in the transcription with the damage element. Many aspects of the damage can be expressed in attributes, most important of which are: the hand that caused the damage (when it is caused by identifiable human intervention) the cause of the damage the amount of damaged text, expressed in prose descriptions like 2 words, 3 letters the length of the damage in a specific unit (specified with the unit attribute) the unit in which the length of the damage is expressed (with the quantity attribute), e.g.: cm (centimetres), chars (text characters) a characterisation of the type of the damage

One important condition for the use of the damage element, is that it should contain text that is more or less legible, or can be reconstructed. When no further (interpretative) claims about this text are made, this text can be enclosed as such inside the damage element. For example, in our example text, the stapling of the sheets of the writing assignment has caused damage to the top left part of the document, rendering the date line partly illegible. This can be recorded in the transcription:

26/8/08 There and Back Again

Similar to the del and add elements, damage has an empty counterpart: damageSpan/, that should be used when damage runs over different structural boundaries, or contains too large document structures to be valid inside damage. It has the same attributes as damage, as well as an extra attribute spanTo, whose value points to a following identified element in the transcription.

As it may influence the transcription and (degree of) interpretation of the source text, damage can be transcribed as a primary source phenomenon in its own right with the damage element. It can specify several characteristics associated with the damage, such as the responsible hand (if any) in the hand attribute, the cause of the damage in the agent attribute, and a classification of the kind of damage in the type attribute. The extent of the damage can either be given implicitly in an extent attribute, or explicitly with a combination of the quantity and unit attributes, recording the number of measured units, respectively. Damage crossing logical structures or encompassing large text structures can be encoded using an empty damageSpan/ element, whose spanTo attribute can point to the end point of the damage identified further in the transcription.

Editorial interventions
Unclear, supplied, omitted text

Depending on the quality of the source material or the handwriting, transcription of primary source texts may be more or less straightforward. As any further interpretation of an electronic transcription depends on this first interpretative act, it may be desirable for an encoder to indicate places of uncertainty, either for further inspection or to take intellectual responsibility. Text for which the reading is uncertain can be encoded in an unclear element. The reason for the unclear reading can be stated in a reason attribute. If it has been caused by an identifiable human, the hand attribute can provide a link to the definition of a hand in the TEI header of the transcription. If the legibility is affected by damage, the cause of the damage can be described in the agent attribute. For example, as our previous transcription of the word dioxide as diacxside was quite uncertain, this could be indicated with the unclear element:

There and Back Again: digital edition Hanna Renton The TBE crew

di ox acx side

Similarly, if we decided that the damaged dateline at the start of the document could still be deciphered, the uncertain status of this part of the text could be indicated with an unclear element:

26/ 8/08

...or without the damage element, if this is deemed less important to the transcription:

26/8/08

Note, however, that the use of the unclear element implies that the text it encloses must still be present in the document source, and still be legible to some degree. If the encoder considers text too unclear to be transcribed in any way, he or she may opt to omit this part of the text, and indicate this editorial intervention with a gap element. This is typically used as an element, only to indicate the omission, possibly with characterisations of the reason (reason), the hand responsible for this reason, if any (hand), or the damage causing this decision, if any (agent). As with the damage element, the extent of the omission can be specified implicitly with the extent attribute, or more explicitly by combining the unit and quantity attributes.

For example, on page 3 of our sample text, the phrase Yess!! The door!!! is followed by some words that can't all be deciphered confidently, as they appear to have been erased by the author. When transcribing this passage, we could opt to encode an informed guess and mark it with the unclear element, while leaving out the truly illegible words. This omission can be marked with gap:

Yess!! The door!!! I got out.

Similarly, the damage in the dateline could be deemed too destructive for a confident reading of the day, which may motivate the encoder to leave it out. In this case, too, a gap element can be used, either within or without a surrounding damage element:

8/08

In contrast, the editor may wish to make a stronger intervention, by supplying text that is lacking from or illegible in the document source. This can be done by wrapping the added text in a supplied element. In a reason attribute, the reason for this editorial addition can be given. For the dateline example, if the text is considered illegible, but the encoder feels able to reconstruct the date, this can result in following encoding:

26/ 8/08

This allows us to encode other lacking text as well: at the end of page 2, a couple of final words on some lines are incomplete due to xeroxing. These can be reconstructed fairly straightforwardly for the transcription. However, these reconstructions are best signalled with the supplied element:

Nothing was happening. Then, Hello, dearie, an old woman answered. Who is it? I hung up. Uh, oh. How do I get back then?

Note, the crucial difference between the encoding of text added or deleted by the author or editor of the source document on the one hand, and by the encoder of the electronic transcription on the other hand. Additions or deletions present in the source may only be encoded respectively as add and del, while text that has been added or deleted by editorial emendation must be encoded as supplied or gap, respectively.

When text in the source document is still partly legible, but needs interpretation in order to be transcribed, this uncertainty can be expressed by enclosing the text in an unclear element. If text is deemed totally illegible, it can be omitted from the transcription, but signalled with a gap element (without any content). Both elements can indicate the reason for the editorial intervention (reason), the human responsible for this reason (hand), or the nature of the damage (agent). An editor wishing to supply text in the electronic transcription for illegible or lacking text in the source text, can encode this supplied text with the supplied element. In a reason attribute, the reason for this intervention can be stated.

Corrections

If we look back at the comparison between the facsimiles and the initial transcription, we notice that a lot of words have been silently corrected by the transcriber. Although some errors had been corrected by the teacher (who can be considered an editor or corrector of the source document), many have slipped through. Depending on the aim of the transcription, such apparent errors may be transcribed unmediatedly, corrected silently, marked explicitly, or corrected explicitly. All of these practises are perfectly legitimate as long as they are applied consistently and motivated in the editorialDecl element of the electronic document's header. An encoder adhering to a more explicit practise would like to at least signal apparent errors, editorial corrections, or both. The TEI provides specific elements for this purpose: sic, for indicating apparent errors, and corr, for indicating editorial corrections. For example, the sentence Now I know what all the black air is:: all the polution. on page 2 could be transcribed as follows:

Now I know what all the black air is: all the polution.

...if the encoder would be interested in transcribing the source text as accurately as possible, or:

Now I know what all the black air is: all the pollution.

...if the content matters most (perhaps to ease searching operations in a digital edition of the text). However, both views on the text can be combined in a choice element. This enables an encoder to express alternative encodings of the same text. Both views could thus be combined as:

Now I know what all the black air is: all the polution pollution .

The sic element may contain all elements that are necessary to represent the original source text, like deletions, damage, and so on. The diacxside fragment on page two can thus be corrected as follows:

di ox acx side dioxide Again, a crucial distinction must be pointed out between encoding of corrections present in the source document, and editorial corrections in the electronic transcription. The latter must always be encoded using sic and corr, possibly wrapped in a choice element. Corrections present in the source document must be encoded using combinations of del and add, possibly grouped in a subst element, and preferably specified with attributes identifying the responsible document hand (hand), and the editor responsible for this identification (resp).

Apparent errors in the source text may be indicated explicitly in a sic element, or corrected with a corr element. Both the original and the correction can be included in the transcription, if they are wrapped in a choice element.

Summary

This tutorial module has focused on the encoding of specific phenomena of primary source texts in TEI. When all of the concepts discussed are applied to the example text, this is how its transcription could look:

There and Back Again: digital edition Hanna Renton The TBE crew

the document's main hand, Hanna Renton

the document author's teacher

26/ 8/08 There and Back Again

Well done! 8,5 / 10I can't bel ei ie ve it. Carl has not written to me or sent me a postcard once since he's been away in Egypt. It would be easier if our phone was working. It's been broken for ages! Dad can't fix it at the moment, and we can't afford to buy a new one. I would write to him, but he didn't tell me the address of the villa he was staying in. If only I had a mobile, I could phone his mobile number. Eureka!!! I could use next doors door's phone, oh, actually, Mr and Mrs Crooel won't let me use it (they're my next door neighbours). I know! I'll use the phone box!!! (I think I've got some change).

Goodness me, this phone box stinks. EEAW, I don't even want to know what that is. Anyway, I hope his phone is switched on. What's it again??? Oh, yeah 1312632. Arrgh!! W a h ats What's happening!!! Who's shaking the phone box!! Who turned out off the lights!!!!

WOW!!! Where am I? Why is everything so smokey smoky ? Everything is silver except the air around me, it's black, and I'm standing in a silver pod, with something that lookes looks like a phone. When you look up there are millions of metal poles, and some of them have w a h at look like funny shaped cars whizzing along attached to the metal poles at the top.

There seemes to be no-one around the phone box. Yuk! s S omeone has just walked past. All their skin is black and crusty and in the side of their neck are gitt like things. The whites of his or her eyes are grey and he, or she has no hair. I also notice that he, or she has a clear gas mask. It's from all the smoke.

Goodness me! I just stepped outside the phone box and I couldn't breathe. "breath" = noun "to breathe" = verb It was like a kng king cobra was wrapped around my neck and if I was to get a little bit of air in it was horrible, like when you stop at red man beside the traffic lights and a bus is stopped beside you and you're getting breaths of carben di ox acx side carbon dioxide . But this was 100x worse. Now I know what all the black air is: all the polution pollution . But that doesn't help me figure out where I am.

What's that? It's a big poster at on the wall, saying: Monday 26th May 1312632. I've gone into the future!!! Wait, I recognise the date. It's Carls Carl's number! When I typed it in on the key pad in the phone box, that must of have taken me into the future: I must get back and warn everyone! I'll type in 2008. Nothing was happening. Then, Hello, dearie, an old woman answered. Who is it? I hung up. Uh, oh. How do I get back then?

I've been thinking for ages about what to do. There only seems to be one good option, fix and stop all the polution pollution . This sort of seems like a dream, but a fun dream. I'll just have to find out where the city's power source is. But I've got to go outside (again).

It was alot a lot easier to find than I thought it would be. I got round the corner and ther there was a BIG sign saying CITYS CITY'S POWER SOURCE. It's very oily and extremely big. Ah, this will be the switch.

Everything has gone dark and I can't see where I'm going. I keep on banging into long bars and wires and knobs. Yess!! The door!!! I got out.

There is uproar outside. I sealed the door with stones on the ground so no one could get it in to turn the switch back on.

I've been thinking. If I'm going to suck out all the polution pollution I'm going to need help. Which is not going to be easy. cafe

Everyone keeps on staring at me. It's very annoying. I hope people will help!

OK. I think this will work. I've put up posters everywhere. They say... MEETING BESIDE PHONE BOX BE THERE AT 2pm. I hope they read english English . And english English time.

What's next?

You have reached the end of this tutorial module covering the markup of primary source materials with TEI. You can now either proceed with other TEI by Example modules have a look at the examples section for the primary sources module. take an interactive test. This comes in the form of a set of multiple choice questions, each providing a number of possible answers. Throughout the quiz, your score is recorded and feedback is offered about right and wrong choices. Can you score 100%? Test it here!